Description

THIS IS A REFURBISHED UNIT, TO BE USED WITH ETHANOL (COOLING MODE) OR DISTILLED WATER (HEATING MODE) ONLY.

All refurbished units are fully tested at Ai before leaving our facilities and come with 3-MONTH warranty.

Ai
C40 series recirculating chillers are the true thermostatic control
laboratory chiller, they allow you to remove or add temperature as
required by your application. This closed laboratory chiller is ideal
for applications such as cooling
rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.

Ai
C40 are compressor-based recirculating chillers that offer outstanding
performance and high reliability as well as quiet operation and
ease-of-use. Powerful
force/suction pump provides constant flow rates, while microprocessor
PID controller gives you the ideal solution when you need precise
temperature control or cooling below ambient temperature.

C40 circulating chiller features

  • No dry ice or liquid nitrogen needed
  • Wide temperature range from -30°F to 210°F
  • Secondary over temp protection
  • Advanced PID digital temp controller
  • All steel construction for durability
  • Cost saving as the water consumption is completely eliminated
  • Built-in casters for mobility
  • Plug and play, no assembly required

Specifications

 Model  C40-48-220
 Electrical requirements
 220V 60Hz 1-PH 17A, 3200 watts
 Capacity  48 liters or 12.7 gallons
 Compressor  Make: Tecumseh Model AWA AWA2460ZXD (USA)
 Power: 208-230V 60Hz or 200V 50Hz, 2 HP
 Number of compressor: One
 Refrigerant type: R410A
 Refrigerant capacity: 2.5 Lbs
 Cooling capacity: 6300 BTU / 1588 Kcal/h / 1846W
 Radiator  220V 50/60Hz 1-PH 200 watts
 Recirculating pump  Make: Wilo (Germany) PM-052PM
 Output: 50 watts
 Pumping speed: 10.6 gallon/min or 40L/min
 Maximum head: 18 feet or 5.5 meters

 Reservoir
 Dimensions: 23.6 x 15.7 x 7.8″ (WxDxH)
 Material: Type 304 stainless steel, polished
 Chilling fluid connection: 3/8″ hose barb x 2

 Temperature controller

 Range: -30°F to 210°F
 Type: Digital microprocessor PID controlled

 Display unit: °F
 Timer range: 0 to 99 hours 59 minutes
 Step: 0.1°F

 Oil separator  Make: North Peak (NS-1003)
 Connection: 3/8″ ODS
 For refrigerant: R134a/R22/R404A/R407C/R507/R410A
 Working pressure: 500 PSIG
 Housing  Powder coated type 42 stainless steel
 Heater material
 Stainless steel
 Coolant
 Ambient to -35C: Ethanol
 Ambient to 99C: Distilled water
 Built-in swivel casters
 Four
 Unit dimensions 
 28 x 24 x 38 (WxDxH)
 Unit weight  190 lbs
 Safety  Over-temp protection
 Secondary over-temp dial protection
 Compressor over-load protection
 Controller lock
 CE compliant  Yes
 Recommended for rotary evaporators  10L rotary evaporators